Brunswick Californian
Architecture Residential Melbourne, Victoria, Australia
13 Images
Want to download these images?
Make sure you confirm usage rights with the BowerKit owner / contact person.
|
1. 5674 px 8510 px 17 MB A3 print |
|
|
2. 5614 px 8420 px 16 MB A3 print |
|
|
3. 5663 px 8495 px 14 MB A3 print |
|
|
4. 5663 px 8495 px 15 MB A3 print |
|
|
5. 8609 px 5738 px 18 MB A3 print |
|
|
6. 8311 px 5742 px 21 MB A3 print |
|
|
7. 5771 px 8653 px 17 MB A3 print |
|
|
8. 5592 px 7383 px 15 MB A3 print |
|
|
9. 3757 px 5017 px 7 MB A3 print |
|
|
10. 5688 px 6350 px 26 MB A3 print |
|
|
11. New plan 2008 px 1299 px 110 KB Print - Low res only |
|
|
12. Old plan 2008 px 1299 px 108 KB Print - Low res only |
|
|
13. Before View of living area before renovation 2144 px 1424 px 588 KB Print - Low res only |
Description
This bungalow had already seen one other major renovation before we were approached to improve the main living areas and bathrooms. The available budget precluded demolition of the previous extension, so our challenge was to reconfigure spaces within the existing shell while negotiating forms and finishes from three eras – the original early 20th-century construction, the late 20th-century addition, and the proposed alterations.
To increase the size of the main living space and reconnect the rear of the house with the front, the central wall was moved in line with the existing entry wall. This also allowed for the west bathroom to be turned into an ensuite, and brought a lot more light into the entrance hallway. A linen cupboard was snuck into the new wall, to be concealed with a built-in robe in the bedroom behind. The northeast corner was re-planned to provide separate bath and powder rooms without having either opening directly onto the dining area.
The new kitchen was designed to increase bench and storage space while opening up to both the dining and living areas. Open shelving was placed at the ends of the long benches to prevent them from appearing too monolithic. We wanted to maintain the sense of rhythm and proportion in the space, and felt that two solid blocks would have appeared too heavy and opaque. A new pantry and refrigerator space, both sorely needed, were added while converting the southeast bedroom into a study.
Sitting at the end of, and in some ways in between two eras, we decided that restraint was called for in selecting new materials and finishes. We opted for simple geometric shapes and classic patterns to complement, and not compete, with the existing art deco features and the previous renovation. At the same time, details like custom-plated brass knobs were added to make the house feel just a bit more special, and imbue it with a stronger sense of place.
A fresh coat of paint was applied throughout the house to tie everything together.
Questions and Answers
How is the project unique?
We worked hard to achieve a dramatic transformation of the house entirely within the existing shell while tying together otherwise disjointed features from previous eras through restraint in introduced forms, materials, and finishes.
When was the project completed?
October 2016
What were some key challenges?
Aside from stitching together various elements from three different eras, removing the the central wall was actually a significant exercise in structural design, as it was a key structural component of the existing house.
How did you overcome the challenges?
As mentioned in the description, we tied the original house and the late-20th-century renovation together through a combination of careful spatial design and restraint in the forms, patterns, and materials used.
The structural issue was resolved by working closely with the engineer and builder to conceal the new columns and large new beams within the walls and roof to keep the space looking clean and open.
Details
| Project size | 110 m2 |
| Completion date | 2016 |
Project team
|
Tan Architecture |